Cara Konfigurasi DHCP Server di Mikrotik

DHCP Server berfungsi untuk memberikan IP Address kepada komputer client secara otomatis.

*Konfigurasi DHCP Server* Interface DHCP Server ether2 IP Network 192.168.10.0/24 Gateway 192.168.10.1 IP Client 192.168.10.10 – 192.168.10.254 DNS server 192.168.1.1 Lease time/Lamanya waktu peminjaman sebuah IP Address kepada client diset 30 menit

[INPUT]

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ip dhcp-server setup Select interface to run DHCP server on   dhcp server interface: ether2 Select network for DHCP addresses   dhcp address space: 192.168.10.0/24 Select gateway for given network   gateway for dhcp network: 192.168.10.1 Select pool of ip addresses given out by DHCP server   addresses to give out: 192.168.10.10-192.168.10.254 Select DNS servers   dns servers: 192.168.1.1 Select lease time   lease time: 00:30:00

Tampilkan DHCP Server

[INPUT]

1 2 3 4 ip dhcp-server print Flags: X – disabled, I – invalid #   NAME    INTERFACE     RELAY    ADDRESS-POOL    LEASE-TIME ADD-ARP    dhcp1   ether2                 dhcp_pool1      30m

Tampilkan DHCP server network

[INPUT]

1 2 3 ip dhcp-server network print # ADDRESS            GATEWAY         DNS-SERVER      WINS-SERVER     DOMAIN                                                 192.168.10.0/24    192.168.10.1

Tampilkan IP yang sedang terpakai

[INPUT]

1 2 3 4 ip dhcp-server lease print Flags: X – disabled, R – radius, D – dynamic, B – blocked #   ADDRESS           MAC-ADDRESS       HOST-NAME       SERVER       RATE-LIMIT     STATUS D 192.168.10.30     08:00:27:B4:E2:34 pc-winxp        dhcp1                       bound

*Proteksi DHCP Server* Proteksi ini diberikan agar komputer harus memakai DHCP. Jika menggunakan IP Static tetap tidak akan bisa terkoneksi walaupun IP Address dan Gateway sudah betul.

[INPUT]

1 ip dhcp-server set numbers= add-arp=yes

[INPUT]

1 2 3 4 ip dhcp-server print                     Flags: X – disabled, I – invalid #   NAME            INTERFACE          RELAY           ADDRESS-POOL          LEASE-TIME ADD-ARP    dhcp1           ether2                             dhcp_pool1            30m        yes  

[INPUT]

1 2 3 4 5 6 7 interface ethernet print Flags: X – disabled, R – running, S – slave #    NAME      MTU MAC-ADDRESS       ARP       R  ether1    1500 08:00:27:1B:CC:5E enabled   1 R  ether2    1500 08:00:27:8C:F2:84 enabled   2 R  ether3    1500 08:00:27:F2:D2:8E enabled   3 R  ether4    1500 08:00:27:55:35:00 enabled

[INPUT]

1 interface ethernet set numbers=1 arp=reply-only

[INPUT]

1 2 3 4 5 6 7 interface ethernet print Flags: X – disabled, R – running, S – slave #    NAME      MTU MAC-ADDRESS       ARP       R  ether1    1500 08:00:27:1B:CC:5E enabled   1 R  ether2    1500 08:00:27:8C:F2:84 reply-only   2 R  ether3    1500 08:00:27:F2:D2:8E enabled   3 R  ether4    1500 08:00:27:55:35:00 enabled

selamat mencoba 🙂